OVERVIEW
The foundation every good tool is built on.
LKM, DME and HASCO standard bases plus fully custom plate sets.
±0.005 mm
Machining tolerance
2–4 wk
Typical lead time
2,500 mm
Max plate length
LKM/DME
Standards
A mold base is not a commodity when the cavity tolerances are tight. We machine, stress-relieve and inspect every plate as if the whole tool depends on it — because it does.
We supply standard and custom bases in S50C, 45#, P20, 718H, NAK80 and S136, with CNC pocketing, water lines, ejector holes, leader-pin bores and hot-runner manifold pockets. Flatness, parallelism and bore tolerances are measured and recorded before assembly.
Bases can be delivered as loose plate sets, semi-assembled or fully assembled with leader pins, bushings, return pins, springs and eye bolts. We work to LKM, DME, HASCO or your own drawing standard.
✓ Stress-relieved plate stock
✓ Flatness and parallelism reports
✓ H7 leader-pin and bushing bores
✓ Hot-runner and water-line integration
CAPABILITIES
What we deliver
Practical capabilities, matched to the tooling and the production volume — not a generic menu.
01
Custom mold bases
Plate sets machined to your drawing, with pockets, bores and water circuits.
02
Standard bases
LKM, DME and HASCO configurations, modified to suit the cavity layout.
03
Plate machining
CNC milling, deep-hole drilling, boring, tapping and precision grinding.
04
Hot-runner integration
Manifold pockets, drop bores, wiring channels and junction-box mounting.
05
Flatness & parallelism
Measured on granite with documented flatness and parallelism to 0.01 mm.
06
Assembly & hardware
Leader pins, bushings, return pins, springs, eye bolts and lift straps.
SPECIFICATIONS
Typical range and tolerances.
Every project is quoted against the part, material and inspection requirement. Values below are typical starting points — we confirm the exact capability for your drawing.
Material
S50C, 45#, P20, 718H, NAK80, S136
Max plate size
2,500 × 1,500 × 800 mm
Flatness
0.02 mm / 300 mm
Parallelism
0.01 mm
Bore tolerance
H7 (typical)
Surface finish
Ra 0.8 µm (ground)
MATERIALS & TOOLING
Materials we work with
S50C · 45# · P20 · 718H · NAK80 · S136 · H13
Documentation
✓ Material certificates on request
✓ Dimensional report with critical dimensions
✓ Trial report and process parameters
✓ 2D drawings and spare-part list
PROCESS
How the project runs
A named project manager, weekly reporting and documented sign-off at each stage.
01
Drawing review
Check plate sizes, pocket depths, bore positions and interference.
02
Machining
CNC milling, drilling, boring, tapping and grinding under one roof.
03
Inspection
Flatness, parallelism, bore diameter and position reported.
04
Assembly & packing
Hardware fitment, rust prevention and export packing.
GALLERY
From the floor
Representative tooling, machining and inspection work from our Kunshan facility.
FAQ
Questions, answered.
Can you machine a base to our own drawing?
Yes. Send a 3D model or 2D drawing with material, plate sizes, pocket and bore details. We will confirm feasibility and quote.
Do you supply standard LKM or DME bases?
Yes. We can supply standard configurations or modify them for your cavity layout, hot runner and ejector system.
What is the typical lead time?
Simple bases are typically 2–3 weeks; complex bases with hot-runner pockets and many bores are 3–4 weeks, depending on material availability.
Can you assemble the base with hardware?
Yes. Leader pins, bushings, return pins, springs and eye bolts can be fitted and checked before shipment.
START A PROJECT
Have a mould project in mind?
Send us your part data and requirements. We will reply with a DFM review and a clear quotation within 24 hours.